Show All

Hide All

ActiveReports provides the WPF Viewer that you can use to load and view your reports. This viewer contains a toolbar and a sidebar with Thumbnails, Search results, Document map and Parameters panes.

Warning: The TargetInvocationException occurs on running a WPF browser application in Partial Trust. Refer to Running WPF Viewer in Partial Trust section given below to run your WPF Browser Application in Partial Trust. To ensure that you are using Full Trust: From the Visual Studio Project menu, select YourProject Properties. On the Security tab, under Enable ClickOnce security settings, select the This is a full trust application option.

WPF Viewer Toolbar

The following table lists the actions you can perform through the WPF Viewer toolbar.

Toolbar Element	Name	Description
	Toggle Sidebar	Displays the sidebar that includes the Thumbnails, Parameters, Document map and Search results panes.
	Print	Displays the Print dialog where you can specify the printing options.
	Find	Displays the Find dialog to find any text in the report.
	Zoom out	Decreases the magnification of your report.
	Zoom in	Increases the magnification of your report.
	Current zoom	Displays the current zoom percentage which can also be edited.
	Fit page width	Fits the width of the page according to viewer dimensions.
	Fit whole page	Fits the whole page within the current viewer dimensions.
	First page	Takes you to the first page of the report. This button is enabled when a page other than the first page is open.
	Previous page	Takes you to the page prior to the current page. This button is enabled when a page other than the first page is open.
	Current page	Opens a specific page in the report. To view a specific page, type the page number and press the Enter key.
	Next page	Takes you to the page following the current page. This button is disabled on reaching the last page of the report.
	Last page	Takes you to the last page of the report. This button is disabled on reaching the last page of the report.
	Backward	Takes you to the last viewed page. This button is enabled when you move to any page from the initial report page. Clicking this button for the first time also enables the Forward button.
	Forward	Takes you to last viewed page before you clicked the Backward button. This button is enabled once you click the Backward button.
	Back to parent report	Returns you to the parent report in a drillthrough report.
	Refresh	Refreshes the report.
	Cancel	Cancels rendering of the report.

WPF Viewer Sidebar

The WPF Viewer sidebar appears on the left of the Viewer control when you click the Toggle sidebar button in the toolbar. By default, this sidebar shows the Thumbnails and Search Results panes. The additional Document map and Parameters also appear in this sidebar. You can toggle between any of the viewer panes by clicking the buttons for each pane at the bottom of the sidebar.

Thumbnails pane

The Thumbnails pane appears by default in the sidebar when you click the Toggle sidebar button in the toolbar.

This pane comprises of a thumbnail view of all the pages in a report. Click any thumbnail to navigate directly to the selected report page. You can also modify the size of the thumbnail when you click (+) or (-) button to zoom in and zoom out.

Search results pane

The Search pane is the other default pane besides Thumbnails that appears in the sidebar when you click the Toggle sidebar button. This pane lets you enter a word or phrase from which to search within the report.

To search in a report:

• Enter the word or phrase in the search field.
• Under Use these additional criteria, you may optionally choose to search for the whole word or match the case of the search string while searching in the report.
• Click the Search button to see the results appear in the Find results list.
• Click an item in the list to jump to that item in the report and highlight it.

To start a new search or clear the current search results, click the Clear button under the Find results list.

Document map pane

The Documents map pane sis enabled for reports where the Label property or the Document map label is set. This pane displays each value for the text box, group, or sub report that you label, and you can click them to navigate to the corresponding area of the report in the Viewer.

If a report does not have the Label property or Document map label set, the Documents map panes does not appear in the sidebar.

Parameters pane

The WPF Viewer allows you to view reports with parameters. In the toolbar, click the Toggle sidebar button to open the WPF Viewer sidebar and if your report contains parameters, the Parameters pane shows up automatically.

1. In the Parameters pane, you are prompted to enter a value by which to filter the data to display.
2. Enter a value or set of values and click View report, to filter the report data and display the report.

If a report does not have parameters, the Parameters pane does not appear in the sidebar.

Display the report in the WPF Viewer

Set up your WPF Application project by using the following steps.

1. Create a new WPF Application project or open an existing one.
2. For a new project, in the Visual Studio Solution Explorer, right-click YourProject and select Add, then New Item.
3. In the Add New Item dialog that appears, select the ActiveReports 9 Page Report, ActiveReports 9 RDL Report, ActiveReports 9 Section Report (code-based) or ActiveReports 9 Section Report (xml-based). This adds the necessary references to your project.
4. From the Toolbox ActiveReports 9 tab, drag the Viewer control and drop it on the design view of MainWindow.xaml.

   Note: Dragging the Viewer control to the design view of MainWindow.xaml automatically adds the corresponding reference to the licenses.licx file.

5. In the Properties window, with the report selected, set Copy to Output Directory to Copy Always.
6. On MainWindow.xaml, with the viewer selected, go to the Properties window and double click the Loaded event.
7. In the MainWindow code view that appears, add code like the following to the viewer1_loaded event to bind the report to the viewer. Each of these code snippets presumes a report in the project of the type indicated with the default name. (If you have renamed your report, you need to rename it in the code as well).

   Note: Refer to the LoadDocument method to see other ways to load a report in WPF Viewer. Microsoft .NET Framework version 4.0 or higher is required to view reports in WPF Viewer.

   To write the code in Visual Basic.NET

   The following example demonstrates how you display a page report or RDL Report in the WPF Viewer control.

   Visual Basic.NET code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.vb.	Copy Code
   Viewer1.LoadDocument("YourReportName.rdlx")

   The following example demonstrates how you can display a section report (code-based) in the WPF Viewer control.

   Visual Basic.NET code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.vb.	Copy Code
   viewer1.LoadDocument(new YourReportName())

   The following example demonstrates how you can display a section report (xml-based) in the WPF Viewer control.

   Visual Basic.NET code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.vb.	Copy Code
   Viewer1.LoadDocument("YourReportName.rpx")

   To write the code in C#

   The following example demonstrates how you display a page report or RDL report in the WPF Viewer control.

   C# code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.cs.	Copy Code
   viewer1.LoadDocument("YourReportName.rdlx");

   The following example demonstrates how you can display a section report (code-based) in the WPF Viewer control.

   C# code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.cs.	Copy Code
   viewer1.LoadDocument(new YourReportName());

   The following example demonstrates how you can display a section report (xml-based) in the WPF Viewer control.

   C# code. Paste INSIDE the viewer1_Loaded event in MainWindow.xaml.cs.	Copy Code
   viewer1.LoadDocument("YourReportName.rpx");

Additional Features

Following is an introduction to the additional capabilities of the Viewer to guide you on using it effectively.

Keyboard Shortcuts

Advance Printing Options

Running WPF Viewer in Partial Trust

You can run a WPF Viewer Browser Application in Partial Trust by customizing the permission set in the app.mainfest file. While customizing the permission set, some of the permissions are to be set explicitly like MediaPermission, UIPermission, etc. Follow these steps to learn how to run a WPF Viewer application in partial trust.

Note: These steps assume that you have already created a WPF Browser Application that contains the WPF Viewer control.

1. In the Solution Explorer, right-click your WPF Browser Application and select Properties.
2. On the properties page that opens, go to the Security tab.
3. On the Security tab, set Zone your application will be installed from to Custom and click the Edit Permissions XML button. This opens the app.mainfest file.
4. In the app.manifest file, replace the existing xml code inside the <applicationRequestMinimum> </applicationRequestMinimum> tags with the following code.

   Code

   XML

   Copy Code

   <defaultAssemblyRequest permissionSetReference="Custom" /> <PermissionSet class="System.Security.PermissionSet" version="1" ID="Custom" SameSite="site"> <IPermission class="System.Data.SqlClient.SqlClientPermission, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Data.OleDb.OleDbPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Security.Permissions.MediaPermission, WindowsBase, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" version="1" Audio="SafeAudio" Video="SafeVideo" Image="SafeImage" /> <IPermission class="System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Security.Permissions.EnvironmentPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Security.Permissions.FileIOPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> <IPermission class="System.Security.Permissions.ReflectionPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" />> <IPermission class="System.Security.Permissions.StrongNameIdentityPermission, , mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" version="1" Unrestricted="true" /> </PermissionSet>

5. Press F5 to run your WPF Browser Application.

Note: The Partial Trust Limitations are applicable to the WPF viewer running in Partial Trust. For more information, see Medium Trust Support.

Copyright © 2016 GrapeCity, inc. All rights reserved